Renovate by zone
Plan dining room, kitchen and storage separately, use treated zones only once dry.
Restaurants · Cafés · Bars
Dining room, kitchen, storage. Each zone gets its product.
Renovate in quiet periods with a clear product choice per zone.
Illustrative image, not a reference.
What matters in operation
Three reasons to look closer
Wipeable surfaces
Walls can be wiped down in daily use. Surface hygiene, not sterilisation.
Cold surfaces handled
Dry Cool can reduce condensation on cold surfaces, depending on ventilation and moisture sources.
Application explorer
Where in your building?
Pick an area: product, approach, what to check.
ISORYX InsideDining room
Walls and high ceilings on quiet days.
- Product
- ISORYX Inside
- Approach
- Check and prepare the substrate, Primario on absorbent surfaces, then roller or brush per the technical data sheet.
- Check first
- Do not assume an acoustic effect.
Principle
The principle in a picture
Qualitative illustration, no measured values.
Solar heat hits the outer wall. The coating reflects part of the radiant heat at the surface, so rooms may feel less heated up.
Schematic only. Actual effect depends on the building. Not a replacement for insulation, no promised savings.
Matching products
Relevant for these buildings
ISORYX Inside
Interior walls and ceilingsSolvent-free, odour-neutral, VOC emissions class A.
ISORYX Dry Cool
Cold surfacesFor surfaces with condensation issues. Own documents.
ISORYX Outside
Facades, weathered surfacesFor exterior walls and cladding.
ISORYX Primario
Substrate preparationFor absorbent substrates before the top coat.
Application
Four steps to a finished surface
Check
Substrate clean, dry, sound. Fix moisture causes first.
Prime
Absorbent: Primario. Metal: specialist advice on corrosion protection and primer.
Apply
Roller or brush, normally two coats for Inside, at least 0.40 mm dry.
Dry
About 24 h per coat at 20 °C and 65 % RH, longer if colder or more humid. Reuse rooms only once sufficiently dry.
Guide values for Inside per its data sheet; Outside has its own sheet. These values do not apply to Dry Cool.
Technical data sheets (Original in German)
Clearly framed
What ISORYX is, and what it is not
Energy
Not a replacement for insulation or waterproofing. No guaranteed savings.
Acoustics
Room acoustics are not airborne or impact sound insulation. No measured values.
Indoor air
VOC emissions class A means low emissions, not air purification.
Moisture and hygiene
Less condensation depends on ventilation and causes. Surface hygiene is not sterilisation.
Fire
A2-s1,d0 only for documented tested systems, not universal.
FAQ
Common questions
May it touch food?
There is no documented approval for direct food contact.
How long are zones closed?
It depends on area and coats, and no schedule is guaranteed. Guide value about 24 h per coat at 20 °C, 65 % RH. Use treated zones only once dry.
The next practical step
Calculate quantities, watch the documentation or email your surfaces.
The email button opens your mail app. No form is submitted.
Illustrative AI images of building situations, not customer references.