Understand condensation
It forms where humid air meets cold surfaces. That is what Dry Cool is meant for.
Cold cells · Storage · Food production
Cold surfaces. Less condensation.
Dry Cool for surfaces where warm air meets cold.
Illustrative image, not a reference.
What matters in operation
Three reasons to look closer
Clean surfaces
Drier wall surfaces are easier to keep clean. Surface hygiene, not sterilisation.
Clarify first
Check temperature, substrate and moisture sources together, then request Dry Cool documents.
Application explorer
Where in your building?
Pick an area: product, approach, what to check.
ISORYX Dry CoolCold cells
Walls and ceilings with a condensation issue.
- Product
- ISORYX Dry Cool
- Approach
- Match surface and temperature range against the Dry Cool documents. Procedure agreed with Isonova.
- Check first
- Confirm suitability per surface and temperature.
Principle
The principle in a picture
Qualitative illustration, no measured values.
Warm, humid air meets a cold surface: condensation can form.
Schematic only. Actual effect depends on the building. Not a replacement for insulation, no promised savings.
Matching products
Relevant for these buildings
ISORYX Dry Cool
Cold surfacesFor surfaces with condensation issues. Own documents.
ISORYX Inside
Interior walls and ceilingsSolvent-free, odour-neutral, VOC emissions class A.
ISORYX Outside
Facades, weathered surfacesFor exterior walls and cladding.
ISORYX Primario
Substrate preparationFor absorbent substrates before the top coat.
Application
Four steps to a finished surface
Check
Substrate clean, dry, sound. Fix moisture causes first.
Prime
Absorbent: Primario. Metal: specialist advice on corrosion protection and primer.
Apply
Roller or brush, normally two coats for Inside, at least 0.40 mm dry.
Dry
About 24 h per coat at 20 °C and 65 % RH, longer if colder or more humid. Reuse rooms only once sufficiently dry.
Guide values for Inside per its data sheet; Outside has its own sheet. These values do not apply to Dry Cool.
Technical data sheets (Original in German)
Clearly framed
What ISORYX is, and what it is not
Energy
Not a replacement for insulation or waterproofing. No guaranteed savings.
Acoustics
Room acoustics are not airborne or impact sound insulation. No measured values.
Indoor air
VOC emissions class A means low emissions, not air purification.
Moisture and hygiene
Less condensation depends on ventilation and causes. Surface hygiene is not sterilisation.
Fire
A2-s1,d0 only for documented tested systems, not universal.
FAQ
Common questions
Do Inside values apply to Dry Cool?
No. Dry Cool has its own documents; please request them.
Does it solve condensation reliably?
It can reduce condensation, depending on ventilation and moisture sources.
The next practical step
Calculate quantities, watch the documentation or email your surfaces.
The email button opens your mail app. No form is submitted.
Illustrative AI images of building situations, not customer references.