Easy to plan
Solvent-free, odour-neutral: room by room in school-free periods, reoccupy once dry.
Schools · Nurseries · After-school care
Learning rooms, renewed in phases.
Plan classrooms, group rooms and corridors in phases, for example in school-free periods. Reoccupy rooms only once sufficiently dry.
Illustrative image, not a reference.
What matters in operation
Three reasons to look closer
Mindful material choice
VOC emissions class A for low emissions. No health or allergy claims.
Cleanable surfaces
Wall surfaces that are easy to clean day to day. Surface hygiene, not infection prevention.
Application explorer
Where in your building?
Pick an area: product, approach, what to check.
ISORYX InsideClassrooms and groups
Room by room in school-free periods.
- Product
- ISORYX Inside
- Approach
- Check and prepare the substrate, Primario on absorbent surfaces, then roller or brush per the technical data sheet.
- Check first
- Timing from the data sheet; no medical claims.
Principle
The principle in a picture
Qualitative illustration, no measured values.
Solar heat hits the outer wall. The coating reflects part of the radiant heat at the surface, so rooms may feel less heated up.
Schematic only. Actual effect depends on the building. Not a replacement for insulation, no promised savings.
Matching products
Relevant for these buildings
ISORYX Inside
Interior walls and ceilingsSolvent-free, odour-neutral, VOC emissions class A.
ISORYX Outside
Facades, weathered surfacesFor exterior walls and cladding.
ISORYX Primario
Substrate preparationFor absorbent substrates before the top coat.
Application
Four steps to a finished surface
Check
Substrate clean, dry, sound. Fix moisture causes first.
Prime
Absorbent: Primario. Metal: specialist advice on corrosion protection and primer.
Apply
Roller or brush, normally two coats for Inside, at least 0.40 mm dry.
Dry
About 24 h per coat at 20 °C and 65 % RH, longer if colder or more humid. Reuse rooms only once sufficiently dry.
Guide values for Inside per its data sheet; Outside has its own sheet. These values do not apply to Dry Cool.
Technical data sheets (Original in German)
Clearly framed
What ISORYX is, and what it is not
Energy
Not a replacement for insulation or waterproofing. No guaranteed savings.
Acoustics
Room acoustics are not airborne or impact sound insulation. No measured values.
Indoor air
VOC emissions class A means low emissions, not air purification.
Moisture and hygiene
Less condensation depends on ventilation and causes. Surface hygiene is not sterilisation.
Fire
A2-s1,d0 only for documented tested systems, not universal.
FAQ
Common questions
Is it health-tested for children?
We make no medical claims. Inside carries VOC emissions class A.
Can this be done in one break?
It depends on area, number of coats and drying, and there is no guaranteed schedule. Reuse rooms only once sufficiently dry. Guide value about 24 h per coat at 20 °C and 65 % RH.
The next practical step
Calculate quantities, watch the documentation or email your surfaces.
The email button opens your mail app. No form is submitted.
Illustrative AI images of building situations, not customer references.